Installing
Preparation
- Download the installation image from https://akips.com/download
- Mount the ISO and boot the system using UEFI mode with Secure Boot disabled.
Installation process
Once the system boots from the ISO, follow these steps:
1. Start Installation
- Select Install from the welcome screen.
- Confirm by selecting Yes at the Risk of Data Loss prompt.
2. Initial Configuration
- Choose your preferred Keymap.
- Enter a valid Hostname (e.g.,
nms.example.com). - Set and confirm a password. This password will apply to the following user accounts:
| Account | Purpose |
|---|---|
| root | System configuration and recovery |
| akips | SSH access i.e. ssh akips@{server} |
| admin | Web GUI access |
3. Network Configuration
- Choose between Static IP or DHCP.
If using Static IP, provide:
- IP Address
- Subnet Mask
- Default Router
- Set DNS servers and NTP servers.
4. Time Zone
- Verify hardware clock settings and select the correct Time Zone as needed.
5. Reboot the system when prompted.
6. Post-Reboot Access
After the system restarts, launch a web browser and log in to AKIPS using the configured IP address or DNS name with the previously set up admin account.